FDM 3D printing for parts that get used.
Strong, functional parts printed in engineering-grade plastics. Prototypes, replacement parts, brackets, enclosures and short production runs, printed in our Kitchener-Waterloo shop on industry-leading machines.
Built to be used
Functional parts that hold up to real loads, heat and wear, not just display pieces.
The right material
From everyday PLA to glass-filled nylon and more, matched to what your part has to survive.
Tuned for strength
Walls, infill and print orientation are set for how the part is loaded, not just how it looks.
Capabilities
Materials
PLA
Rigid, crisp detail and plenty of colour choices. Great for prototypes, models, display pieces and indoor parts. Not suited to hot spots like a car interior in summer.
PETG
Tougher than PLA, with better heat and moisture tolerance and a little give before it breaks. A great all-rounder for clips, mounts and functional parts. It is what our own watch band adapters are made from.
TPU
Flexible and rubber-like. Gaskets, bumpers, grips, straps, sleeves and anything that needs to bend and spring back.
Nylon
Tough, wear-resistant and low friction. Gears, hinges, clips and parts that rub or flex over and over.
Glass-filled nylon
Nylon reinforced with glass fibre for high stiffness, strength and heat resistance. Brackets, mounts and parts under load, like the brackets pictured above.
& more
We print many more materials than the ones listed here. Tell us what the part has to survive (heat, sunlight, chemicals, impact) and we will recommend one.
Applications
Prototypes
Test fit, form and function before you commit to tooling or a production run.
Replacement parts
Broken, discontinued or hard-to-find parts, reproduced or improved.
Brackets and mounts
Custom mounts for cars, tools, electronics and fixtures that off-the-shelf parts will not fit.
Jigs and fixtures
Shop aids that hold, align and guide your work, made to measure.
Enclosures
Cases and housings for electronics and sensors, with cut-outs and mounting points where you need them.
End-use parts
Short production runs of finished parts and products, printed in-house.
How it works
-
01
Send your file
Upload a 3D file, or a sketch and dimensions, with a quote request.
-
02
Get a quote
We review it, recommend a material and settings, and send pricing.
-
03
We print
Printed in our own shop and checked before it goes out.
-
04
Pick up or ship
Local pickup in Kitchener-Waterloo, or we ship it to you.
Serving Kitchener-Waterloo, Cambridge, Guelph and the GTA
Wicz Designs is a custom fabrication shop in Kitchener, Ontario. We FDM 3D print prototypes, replacement parts and short production runs for customers across Kitchener, Waterloo and Cambridge, Guelph and Wellington County, and the Greater Toronto Area including Mississauga, Brampton, Oakville, Burlington, Hamilton, Milton and Toronto. Local pickup is available at the shop, and we ship across Canada and internationally.
Need finer detail or a smoother surface? Take a look at our SLA resin printing. Do not have a 3D file yet? Our 3D design and 3D scanning services can get you one.
Questions, answered
What is the biggest part you can print?
FDM parts can be up to 325 × 320 mm with a maximum height of 320 mm. Larger parts can be printed in sections and joined. For large parts that need fine detail, see our SLA printing.
Which material should I choose?
Tell us what the part does and where it will live, and we will recommend one. As a rough guide: PLA for models and indoor prototypes, PETG for general functional parts, TPU for anything flexible, and nylon or glass-filled nylon for strength, wear and heat. We print many more materials too.
How strong are FDM parts?
It depends on the material, wall thickness, infill and print orientation. Parts are strongest along their layers, so we orient each part around how it will be loaded. Let us know about any loads, heat or impacts the part will see.
What does the surface finish look like?
FDM parts show fine layer lines, which is normal for the process. If you need the smoothest possible surface or very fine detail, SLA resin printing is the better choice.
What file types do you accept?
STL, STEP, 3MF, OBJ and IGES are best. Do not have a 3D file? Send a sketch, photos or dimensions and we can model it for you with our 3D design service.
Can you print just one part?
Yes. One-off prototypes and replacement parts are welcome, and we also handle short production runs.
Where are you located, and do you ship?
We are in Kitchener, Ontario, serving Kitchener-Waterloo, Cambridge, Guelph and the Greater Toronto Area. Pick up at the shop, or have your order shipped anywhere in Canada or internationally.
How do I get a price?
Send your files or a description of the part through the quote form, with the quantity and any deadline. Pricing depends on size, material and quantity, so a quote is the fastest way to an exact number.
Have a part in mind?
Upload your STL, STEP or 3MF file with a quote request, or describe what you need. We will reply with pricing, material advice and a timeline.
Request a quote